TEMES 1.0

The signals of a recording can be divided onto several devices.

To merge the signals into one single TEMES file, first the TEMES file of the master measurement must be opened. Then the node Measurement Blocks has to be selected. And then, the menu item File → Import has to be chosen, and the TEMES file of the slave measurement has to be selected.

A synchronized measurement with several devices has following restrictions:

•Only one measurement block should be recorded (namely the measurement block Fast). However, the slow signals can be assigned to one or more slave units.

•One digital channel per device has to be reserved for the synchronization: An output channel for the master unit, and an input channel for the slave unit(s).

•The number of slave devices is limited to 5 (with resistor RM = 10 kΩ) or to 10 (with resistor RM = 5 kΩ).

•The recording should only start after all slave unit(s) are ready for recording.