TEMES 1.0

1.Record a voltage signal.

2.Move the REC slider on.

3.Press the REC button.

4.Wait 5 seconds.

5.Press the STOP button.

6.Optionally, discard the measurement: Move the REC slider off. Press both the STOP button and the REC button, and hold these buttons down for at least 3 seconds until the L4 LED is unlit again.
Make a new measurement: Move the REC slider on. Press the REC button. Wait 5 seconds. Press the STOP button.

7.Remove the USB stick and insert it into the PC

8.Call TEMES menu Hardware → Save Measurement from Mass Storage...

9.Keep both checkboxes checked.

10.Select the USB stick and press the Save... button.